top of page
Construction Workers at Sunset

Products

CEMENT BASED PLASTER copy.jpg

CEMENT BASED PLASTER

Premix Plaster is a cement based ready mix plaster, to carry out traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. It allows better workability and curing. Due to its content in waterproofing additives, premix fiber is particularly recommended for external.

 

Uses.more detals

TWO COMPONENTS HIGH PERFORMANCE RAPIDSETTING copy.jpg

TWO COMPONENTS HIGH PERFORMANCE RAPIDSETTING 

PRE-MIX EX1003 is a two-component cement-based polymer modified, flexible, rapid setting, waterproof... tile adhesive for internal & external use.

PRE-MIX EX1003 is a rapid setting tile adhesive that maintains superior workability and bonding strength especially formulated for use with thin and large format tiles

PRE-MIX EX1003 exceeds standard requirements EN12004 and is classified as C2TES1.

¬ PRE-MIX EX1003 is S1 deformable according to standard EN 12002 with ability to perform in extended open time conditions “E”.

The particular flexibility of PRE-MIX EX1003 along with a high mortar transformation capability will insure durable bonding in internal and external environments with a wide range of tiles and where exposure to thermal and dimensional variations are expected.

​

Uses.more detals

SLEFE LEVELLING  copy.jpg

SLEFE LEVELLING

Floor PRE-MIX EX1005 F is cement based dry ready mixed self levelling mortar for internal use. It is composed of hydraulic binders, mineral charges and special admixtures.

 

ْْUses.more detals

​

​

​

FLEXIBLE CEMENT WATERPROOF copy.jpg

FLEXIBLE CEMENT WATERPROOF 

PRE-MIX EX1008- WP is a cement based two component polymer modified waterproofing slurry, available in grey.

It is applied to concrete and mortar structures to prevent water infiltration. Protection and waterproofing of concrete surfaces. PRE-MIX EX1008- WP applied in a fluid consistency, provides a hard wearing, seamless, flexible waterproof membrane, once cured.

​

Uses.more detals

3D PRINTNG MORTAR.jpg

3D PRINTNG MORTAR

PRE-MIX EX1006- 3D is a ready-mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, better bonding and water retention. PRE-MIX EX1006- 3D is particularly adapted for mounting regular/hollow blocks, stones, and bricks and to fill gaps between concrete and bricks.

​

Uses.more detals

©2022 by HOLOUL FACTORY

bottom of page